To solve the above problems of gold-plated boards, PCBs using gold-plated boards mainly have the following characteristics:

　　1. Due to the different crystal structures formed by gold deposition and gold plating, gold deposition will appear more yellow than gold plating, resulting in better customer satisfaction.

　　2. Due to the different crystal structures formed by sinking gold and plating gold, sinking gold is easier to weld than plating gold, and will not cause welding defects, leading to customer complaints.

　　3. Due to the fact that only nickel gold is present on the solder pad of the sinking gold plate, the signal transmission in the skin effect is in the copper layer and will not affect the signal.

　　4. Due to the denser crystal structure of deposited gold compared to gold plating, it is less prone to oxidation.

　　5. Due to the fact that only nickel gold is present on the solder pad of the sinking gold plate, it will not produce gold wire and cause slight shortening.

Read recommendations:

8L mixed board

4L ENIG board

8L impedance board

High Frequency Inverter PCB wholesale

Impendacne Control PCB price