Call Us Now! KnownPCB +86 755 2794 4155 KnownPCB sales@knownpcb.com
Shenzhen KNOWNPCB Technology Co., Ltd.
KnownPCB
KnownPCBEN KnownPCBCN
KnownPCB
KnownPCB

Capabilities&Applications

Home > 
  • Capabilities&Applications
    • >
  • Capabilities

    • Capabilities

    PCB Process Capability PCBA Process Capability PCB Equipment PCBA Equipment

    SMT process

    ItemStandard CapabilityLimited CapabilityRemark
    SMT processPCBMin SizeL≥30mm,W≥30mmL<30mm,W<30mmBOT、TOP sides components、Fiducial Mark should be≥3mm from the board edge.
    Max SizeL≤650mm,W≤400mm

    L:800-650mm,W:400-450mm

    Component thickness(T)0.5mm≤T≤3mmT＜0.5mm T＞3mm
    Component sizeMin Package

    0201

    (0.6mm*0.3mm)

    01005

    (0.3mm*0.2mm)


    QFP、QFN、SOP、SOJMin Pin distance0.4mm0.3mm≤Pitch<0.4mm
    CSP、BGAMin Pitch distance0.4mm0.3mm≤Pitch<0.4mm
    Put away

    DIP Process (Wave soldering)

    ItemStandard CapabilityLimited CapabilityRemark

    DIP Process

    (Wave soldering)

    		PCB sizeMin SizeL≥30mm,W≥30mmL＜30mm
    Max SizeL≤650mm,W≤400mmL:800-650mm,W:400-450mm
    Thinnest size0.4mmT＜0.4mm
    Thickest size5mmT>5mm
    Put away

    Conformal Coating Process

    ItemStandard CapabilityLimited CapabilityRemark

    Conformal Coating 

    Process

    Technological 

    parameter

    		Temperature range-30°C≤T≤120°C-50°C≤T≤150°C
    Coating thickness20um≤T≤35um35um≤T≤60um
    Put away

    Capability

    ItemProject nameProcess capability
    CapabilityLayers1-36L
    Board thickness0.1-8.0mm
    High FrequencyPTFE，Ceramic、Rogers
    HDIHDI
    HDI Stage1-5 Stage（≥6 Stage need to appraisal）
    Min PCS sizepcs size 5*5mm（less than 3mm need to appraisal）
    Max Panel size21*33inch
    Max Finish copper thickness12OZ
    Min Finish copper thickness1/2oz
    Layer to layer accuracy≤3mil
    Board thickness of Resin0.2-6.0mm
    Board thickness tolerance

    Thickness≤1.0mm；±0.1mm

    Thickness＞1.0mm；±10%

    Impedance tolerance±5Ω（＜50Ω），±10%（≥50Ω）；Min±8%（≥50Ω）
    Bow and twistNormal:0.75%，Min:0.5%   Max:2.0%
    Lamination timesone core ≤5 times
    Put away

    Material Type

    ItemProject nameProcess capability
    Material TypeNormal TG FR4SY S1141、KB 6160A
    Middle TG FR4SY S1150G、KB6165 F、KB6165G(HF)
    High TG FR4SY S1000-2、SY S1165(HF)、KB 6167G(HF)、KB 6167F、TU-768、TU-872、VT-47；
    AluminumGL12、SPS-AL-01、CH-AL-LM3
    CTI 600SY S1600
    High FrequencyRogers4350、Rogers4003;Arlon 25FR、25N;
    PTFERogers series、Taconic series、Arlon series、F4Bseries 、TP series
    Minture+FR4Rogers、Taconic、Arlon、Nelco、F4B+FR-4
    Put away

    Metal material

    ItemProject nameProcess capability
    Metal materialLayersAlumi、Metal:1-8L；Ceramic board:1-2L；
    PCS SizeMAX:610*610mm、MIN:5*5mm
    Max Panel size(Ceramic board)100*100mm
    Finish board thickness0.5-5.0mm
    Copper thickness0.5-12 OZ
    Matel thickness0.5-4.5mm
    Matel material typeAL:1100/1060/2124/3003/5052/6061;Copper:Purple copper
    Min finish holes and toleranceNPTH:0.5±0.05mm；PTH(Aluminum;Metal)：0.3±0.1mm；
    CNC tolerance±0.2mm
    PCB Surface TreatmentHASL/HASL L/F;OSP；ENEPIG；Hard gold;Heavy gold
    Metal PCB Surface TreatmentENEPIG
    Matel materialBergquist（MP06503、HT04503）；TACONIC（TLY-5、TLY-5F）；
    Dielectric thickness75-200um
    Thermal conductivity0.3-3W/m.k（Aluminum,Metal）；24-180W/m.k（Ceramic）
    Put away

    Product Type

    ItemProject nameProcess capability
    Product TypeRigid boaradBack board、HDI、Multilayer burried board、Heavy copper、Power heavy copper、IC Substrate
    Put away

    Stack up

    ItemProject nameProcess capability
    Stack upHDI board

    1+N+1、1+1+N+1+1、2+N+2、3+N+3(Burried hole size 0.3mm)

    Filled vias with copper capped

    Put away

    Surface Treatment

    ItemProject nameProcess capability
    Surface TreatmentPB FreeGold Plating 、ENIG、Gold finger、HASL L/F、OSP、ENEPIG、immersion silver、immersion Tin、ENIG+OSP、ENIG+G/F、Gold Plating +G/F、immersion silver+G/F、immersion Tin+G/F
    PBHASL
    A/R Ratio10：1（HASL、HASL L/F、ENEPIG、immersion silver、immersion Tin）；8：1（OSP）
    Board thicknessENIG：0.2-7.0mm，immersion Tin：0.3-7.0mm（Vertical）、0.3-3.0mm（Level）；immersion silver：0.3-3.0mm；HASL、HASL L/F：0.6-3.5mm、OSP：0.3-3.0mm；Gold plating：0.3-5.0mm（A/R:10:1）
    IC SPACE3mil
    Put away

    Surface Treatment Thickness

    ItemProject nameProcess capability
    Surface Treatment ThicknessHASL、HASL L/F2-40um（HASL MAX:0.4um、HASL L/F MAX:1.5um）
    OSP0.2-0.4um
    ENIGNi：3-5um；Au：1-5uinch，≥3uinch(Need to appraisal)
    Immersion silver6-12uinch
    Immersion Tin≥1um
    Gold Hard Plating2-50uinch
    ENEPIGNi:3-5um，Pd：1-6uinch，Au：1-5uinch
    Gold PlatingAu:0.025-0.10um，Ni≥3um，
    Gold Plating +G/FAu:1-50uinch、Ni≥3um
    Carbon ink10-50μm
    Liquidcopper(10-18um)、via hole（5-8um）、line corner≥5u
    Peelable0.20-0.80mm
    Put away

    Drilling

    ItemProject nameProcess capability
    Drilling0.15/0.2mm Mechanical drilling board thickness(Max)1.5mm/2.5mm
    Laser drilling size(Min)0.1mm
    Laser drilling size(Max)0.15mm
    Drilling size

    0.15-6.2mm

    PTFE series :0.25mm(drill bit:0.35mm）

    Mechanical Blind and Burried holes size≤0.3mm

    Close hole size:0.35mm(Min)（drill bit:0.45mm）

    PTH Half hole size:0.40mm（drill bit:0.5mm）

    A/R Ratio20:1(≤0.2mm)
    Back drill depth0.2mm
    Drilling to conductor space5.5mil(≤8L)；6.5mil（10-14L）；7mil(＞14L)
    Mechanical drilling to conductor space(2stage HDI)7mil（one time）；8mil(two time)；9mil(three time)
    Laser drilling to conductor space7mil（1+N+1）；8mil（1+1+N+1+1 or 2+N+2）
    PTH edge to PTH edge space(diff net)10mil
    PTH edge to PTH edge space(same net)6mil(drilling;laser drilling)；10mil（Mechanical HDI）
    NPTH edge to NPTH edge space8mil
    Drilling accuracy±2mil
    NPTH tolerance±2mil
    PTH tolerance±2mil
    countersunk±0.15mm
    Put away

    Outer layer PAD

    ItemProject nameProcess capability
    Outer layer PADInner Layer and outer Layer PAD size(Laser drilling)10mil（4mil Laser drilling size），11mil（5mil Laser drilling size）
    Inner Layer and outer Layer PAD size(Mechanical drilling)16mil（8mil drilling size）
    BGA PAD Size(min)HASL:10mil，Other:7mil
    BGA tolerance+/-1.2mil（PAD＜12mil）；+/-10%（PAD≥12mil）
    Put away

    Line width/space

    ItemProject nameProcess capability
    Line width/spacewidth/space

    1/2OZ：3/3mil

    1OZ: 3/3.5mil

    2OZ: 5/5mil

    3OZ: 7/7mil

    4OZ: 10/10mil

    5OZ: 15/15mil

    6OZ: 18/18mil

    7OZ: 20/20mil

    8OZ: 24/24mil

    9OZ: 26/26mil

    10OZ: 28/28mil

    12OZ: 32/32mil

    Line tolerance

    ≤10mil：+/-1.0mil

    ＞10mil：+/-1.5mil

    Put away

    Solder mask and Silk screen

    ItemProject nameProcess capability

    Solder mask and Silk screen

    		Solder mask plugged hole size(Min)0.5mm
    Solder mask colorGreen、Yellow、Black、Blue、Red、White、Purple、Pink、Matt Green、Matte Black、cold white.
    Silk screen colorWhite、Yellow、Black
    Peelable hole size(Max)10.0mm
    Resin hole size0.1-1.0mm
    Solder mask damGreen:3.5mil、Other:6mil
    Silk screen line width(Min)Width:3mil,High:24mil(White)； Width:5mil,High:32mil(Black)；
    Hollow out on silk screen space(Min)Width:8mil,High:40mil
    Hollow out on solder mask space(Min)Width:8mil,High:40mil
    Put away

    Router

    ItemProject nameProcess capability
    Router
    		V-CUT to conductor space

    H≤1.0mm:0.3mm(20°)、0.33mm(30°)、0.37mm(45°);

    1.0＜H≤1.6mm:0.36mm(20°)、0.4mm(30°)、0.5mm(45°);

    1.6＜H≤2.4mm:0.42mm(20°)、0.51mm(30°)、0.64mm(45°);

    2.4＜H≤3.2mm:0.47mm(20°)、0.59mm(30°)、0.77mm(45°);

    V-CUT symmetrical tolerance±4mil
    V-CUT Angle tolerance±5°
    V-CUT Spec20°、30°、45°
    G/F bevel20°、30°、45°
    G/F bevel angle tolerance±5°
    Controlled milling/drill tolerance(NPTH)±0.10mm
    Outline tolerance±4mil
    Router slot hole tolerance（PTH）Slot hole width and length ±0.15mm
    Router slot hole tolerance（NPTH）Slot hole width and length ±0.10mm
    Drilling slot hole tolerance（PTH）±4mil
    Drilling slot hole tolerance（NPTH）±2mil
    Put away

    About Us

    Company Profile
    Corporate Culture
    Social Responsibility
    News
    Download

    Product Center

    PCB Design
    PCB Fabrication
    PCB Assembly

    Capabilities&Applications

    Capabilities
    Applications

    Quality Assurance

    Quality Certificates
    Quality Control
    Quality Policy
    Rohs Statement

    Contact Us

    Operation Center: Room 306-309,Bldg D,Liantangkeng Industrial Area,Qianjin Road,Xixiang Street,Bao'an Dist.,Shenzhen City,Guangdong Province,518102,China.

    Tel: +86 755 2794 4155

    Fax: +86 755 2794 4159

    E-mail: sales@knownpcb.com

    ISO 9001:2008 registered © 2022 Shenzhen Knownpcb Technology Co., Ltd. All Rights Reserved ICP: 粤ICP备08036040

    Links: Multilayer PCB / HDI PCB / Rigid-Flex Board / High Frequency PCB / Metal Core PCB / Heavy Copper PCB / Aluminum PCB / PCB Assembly Capability / SMT / Wave Soldering / IC Burning / Function Testing

    ogo

    Appointment Experience

    X