Analysis of tin and sulfuric acid before work. Each 100m2 plate is required to add 11L sulfuric acid, 600 g Tin Salt 235, 600 mlsulfotech part A, 800 ml Sulfotech Part B, 750ml STH Additive Sulfolyt. Automatically add 56ml Sulfotech Part A at 200AH.

　　The solution must be conducted every week to observe and adjust the Sulfotech Part A, Sulfotech Part B.

　　The best value of the project

　　SN2+ 20-30 ml/L 24ml/L

　　W (H2SO4) is 98% 160-185ml/L 175ml/L/L

　　Sulfotech Part A) 30-60ml/L 40ml/L)

　　STH (STH Additive Sulfolyt) 30-80ml/L 40ml/L

　　Sulfotech Part B) 15-25ml/L 20ml/L

　　Operating temperature 18-25 ° C 22 ° C

　　Cathode current density 1.3-2.asd 1.7asd [2]

Read recommendations:

26L high frequency board

4L ENIG board

2L special-shaped board

High speed board Processing

4 Layer Immersion Gold PCB distributors