+86(755) 27944155 sales@knownpcb.com
Home November/01/2026
  1. KnownPCB at electronica 2026: From PCB Quality to PCBA Delivery
    KnownPCB at electronica 2026: From PCB Quality to PCBA Delivery

    When you hand a board design to a supplier, how do your quality requirements carry over from bare board fabrication to final assembly? If your final assembly deadline is already set, how do you fit...

  2. RF PCB Connector Launch: Edge-Mount Drawing Checks
    RF PCB Connector Launch: Edge-Mount Drawing Checks

    An RF PCB connector launch is the transition from the coaxial connector to the board’s transmission line and return path. For a board-edge mount, confirm the connector drawing, local board thickness...

  3. RF PCB Surface Finish: ENIG vs Immersion Silver
    RF PCB Surface Finish: ENIG vs Immersion Silver

    Choose an RF PCB surface finish by identifying where it will cover the circuit. A long exposed transmission line, a short solder land and a board held in storage place different demands on the finis...

  4. HDI Skip Vias: Define the Layer Pair Before Routing
    HDI Skip Vias: Define the Layer Pair Before Routing

    An HDI skip via is a blind connection that bypasses at least one intervening copper layer. For example, a via defined from L1 to L3 reaches the target at L3 while passing L2 without connecting to it...

  1. PCB Lamination Process and Prepreg Flow
  2. How to Choose an IPC Class 3 PCB Assembly Manufacturer
  3. Quick-Turn PCB Lead Time: What Starts the Clock?
  4. V-Scoring vs Tab Routing for PCB Panels
  5. Flying Probe vs Fixture Testing for Bare PCBs
  6. PCB Etch Compensation and Finished Trace Width
  7. PCB Assembly DFM: Practical Rules to Reduce Defects
  8. Low Volume PCB Assembly Buying Guide: What to Know Before Ordering
  9. Low Volume PCB Assembly: A Practical Guide for NPI Projects
  10. How to Improve HDI PCB Stackup Manufacturability Before Production?
  1. <
  2. 1
  3. 2
  4. >
Send Message
Name*
Email*
Company Name*
Address
Job Title
Phone Number