
112G PAM4 PCB design starts with a defined electrical channel, not a laminate label. The engineer needs the gross serial rate, the signaling format, and the reference planes used by the interface sp...

Motor drive PCB layout must provide a short high-frequency connection between the local DC-link capacitance and the switching power stage. Motor phase current alone does not describe that connection...

1. IPC Class 2 vs Class 3: When Is Class 2 Enough?Choosing between IPC Class 2 and IPC Class 3 starts with the consequences of a potential failure. IPC Class 2 is used for products that need dep...

Thermal via resistance can be estimated from the copper in the via barrel. The first calculation uses the copper cross-section, the board thickness, and an assumed copper conductivity. It gives an i...