+86(755) 27944155 sales@knownpcb.com
Home October/01/2026
  1. MCPCB Thermal Resistance: Specify the Heat Path
    MCPCB Thermal Resistance: Specify the Heat Path

    Two metal-core PCB quotations can name the same dielectric thermal conductivity and still describe different thermal designs. One uses a thicker insulation layer. The other quotes a test coupon with...

  2. Telecom PCB Manufacturing: Release the Critical Channel
    Telecom PCB Manufacturing: Release the Critical Channel

    Telecom PCB manufacturing starts with a channel requirement and ends with an approved physical build. Between those points, the team must control the changes that affect a long high-speed route or a...

  3. RF PCB Supplier Evaluation: Check the Build Evidence
    RF PCB Supplier Evaluation: Check the Build Evidence

    RF PCB supplier evaluation should follow the evidence for one proposed construction. A material logo and a photograph of a TDR instrument tell a buyer little about how the supplier will control a pa...

  4. PCB TDR Impedance Test: Read the Lot Report
    PCB TDR Impedance Test: Read the Lot Report

    A PCB TDR impedance test should leave enough information for another engineer to understand what was measured. A report containing one green pass box and an impedance value cannot explain the coupon...

  1. FR4 Rogers Hybrid PCB Stackup: Release Decisions
  2. RO4350B vs RO4003C: Dk, Loss and Material Release
  3. Rigid-Flex Transition Zone: Draw the Boundary
  4. Flex PCB Supplier Evaluation: Check the Construction
  5. Adhesive vs Adhesiveless Flex PCB: Choose the Core
  6. Flexible PCB Bend Radius: Static and Dynamic Use
  7. HDI PCB Manufacturer Evaluation: Prove the Build
  8. Microvia Aspect Ratio: Measure Depth and Diameter
  9. Stacked vs. Staggered Microvias: Choose by Constraint
  10. VIPPO Design Rules: Reading the Via-in-Pad Cross-Section
  1. <
  2. 1
  3. 2
  4. 3
  5. 4
  6. >
Send Message
Name*
Email*
Company Name*
Address
Job Title
Phone Number